Ever since USBs have become pretty much a necessity for everyone who owns a computer these days, many people have been wanting to spruce up their thumb drives. Now there are actually stores or people who would create custom made usb drives for these type of people. Now with a few materials at home and some effort, it is actually possible to save a lot of money and create custom thumb drives right at home.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
Of course it is suggested that one would use a screwdriver for this job because it will help protect the inside. Now the screwdriver will be able to help in a sense that it will easily crack open the case. It is more efficient than just using bare hands because if one will use his bare hands, then he may use too much force and damage the inside.
Now after one has already done this, then the next thing to do would be to think of a new outer covering. Now this is where one can get a little bit artistic. He can actually decide on whatever he would want as an outer covering as the material will not really matter.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
Finally, he then has to put some epoxy or some super glue around the hole so that the drive will not come out. Now this is one of the most important steps of them all because without it, the thumb drive may definitely fall out anytime. Once he has already applied the epoxy or glue, then he should dry it using a hair dryer or electric fan.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
The very first thing that one would do would be to of course get a thumb drive and take off its existing outer cover. This is an imperative step in the process because one cannot create another outer cover if there already is in. Now when doing this, one has to be extremely careful as not to damage to inside.
Of course it is suggested that one would use a screwdriver for this job because it will help protect the inside. Now the screwdriver will be able to help in a sense that it will easily crack open the case. It is more efficient than just using bare hands because if one will use his bare hands, then he may use too much force and damage the inside.
Now after one has already done this, then the next thing to do would be to think of a new outer covering. Now this is where one can get a little bit artistic. He can actually decide on whatever he would want as an outer covering as the material will not really matter.
Some popular things that are used as outer coverings would be old toys, clay, or even legos. However, one does not need to limit himself to these things as he can get as creative as he wants. Once he has already chosen an outer covering for his usb, then he may go on to the next step and get himself a drill.
Of course he must use the drill to drill a hole into the toy just in case there is no hole that can be found there. Now the important thing here to do would be to measure the length and the width of the thumb drive in order to know how big the hole should be. Upon making the hole, one just has to slot the drive inside.
Finally, he then has to put some epoxy or some super glue around the hole so that the drive will not come out. Now this is one of the most important steps of them all because without it, the thumb drive may definitely fall out anytime. Once he has already applied the epoxy or glue, then he should dry it using a hair dryer or electric fan.
So as one can see, it is actually so easy to create a custom thumb drive. One can actually save a lot of money by doing this at home. No longer does he need to find a store that can do this for him. As long as he has a few materials at home and is willing to spare a little bit of time and effort to do this, then he can easily create a beautifully crafted custom thumb drive.
No comments:
Post a Comment